Pascal W/ Marani PDA530P 3-Channel Plate Amplifier AUTHORIZED DEALER!!!
Roll over image to zoom in Click on image to zoom
Pascal W/ Marani PDA530P 3-Channel Plate Amplifier AUTHORIZED DEALER!!!

Pascal W/ Marani PDA530P 3-Channel Plate Amplifier AUTHORIZED DEALER!!!

Marani
Price:
$899.99

Description

Pascal W/ Marani PDA530P 3-Channel Plate Amplifier AUTHORIZED DEALER!!! 

Outstanding Performance High power output: 3 x 500W @ 4Ω 
                              1 x 1000W @ 8Ω (BTL) + 1 x 500W @ 4Ω
Switched-Mode Power Supply with PFC and auto voltage sensing
Pascal Class D Amp Module - full bandwith PWM modulator with ultra low distortion
Full protection circuitry including Over-Current, Over/Under-Voltage, Output DC and Over-Temperature
Excellent sonic performance with 24bit high end converters coupled with 96kHz sample rate
Top-grade DSP Engine 5 band parametric equalization per input channel, selected as Bell, Low/High Shelving variable Q
7 band parametric equalization on Mid and High frequency per output channel, selected as Bell, Low/High Shelving variable Q
3 band parametric equalization on Low frequency per output channel, selected as Bell
Crossover filters with slopes from 6dB/Octave up to -48dB/Octave including Butterworth, Bessel, Linkwitz-Riley
Output features a precision dynamic range controller composed of a RMS Compressor with selectable ratio and variable knee
Adjustable Delay time up to 40 ms for input channels, and up to 20ms for output channels
Input channel includes a Noise Gate function, Pink/White noise generator, sophisticated Dynamic Loudness function
Direct PC/Network Connection Rs485 connection for system setup, monitoring and control via fully manageable remote PC software
Control 8 Preset Selection by using rotary encoder switch
Security Lockout


Power & Amplifier section

Number of Channels 3
Max Output Power @ 8 ohms 3 x 250W 1 x 1000W (Bridge)+1x250W
Max Output Power @ 4 ohms 3 x 500W 1 x 1000W (4Ω BTL Mode selected) + 1x500W
Output Circuitry Class D - full bandwith PWM modulator with ultra low distortion
Output Voltage +/-70 V (SE Mode unloaded) / Bridged +/-140V(BTL Mode unloaded) 
THD @ Rated power 4Ω (1kHz) <0.005% (20 Hz - 20 kHz, 8Ω load, 3dB below rated power)
Signal To Noise Ratio >120 dB (A-weighted, 20 Hz - 20 kHz, 8Ω load)
Frequency Response 20 Hz - 20 kHz ± 0,15 dB (8Ω load, 1 dB below rated power)
Damping Factor >1000 (8Ω load, 1kHz and below)
Power Supplies Switch mode power supply with PFC (Power Factor Correction) and integral standby converter
Operating Range Universal Mains, 85-265V
Consumption / Current draw and Thermal dissipation @ 230 V 13W / -A / 44.3 BTU/h (Idle)   
173W / -A / 143.4 BTU/h (I/8 max. power@4Ω)    
Protections Over-Current, Over/Under Voltage, Output DC and Over-Temperature, Short Circuit Protection
Analog Input 1 x XLR electronically balanced, +12dB
Analog Output 1 x XLR electronically balanced (Link)
AD & DA Converters Cs42528 24bit
Frequency Response (DSP) 20 Hz - 20 KHz; -0.5dBu at 20 Hz and 20 kHz

DSP & Processing

DSP Engine MARANI M704
DSP Resolution 24bit (data) x 24 bit (coeff.),54bit accumulation registers,  96 bit precision on intermediate processing data
Parametric Equalization 5 filters per input channel;
3 filters for Low Frequency on output channel, 7 filters for Mid and High Frequency on output channel 
Filter Type Bell, Low/High Shelving Variable Q
Filter Gain Input from -12dBu up to +12dBu by 0.5dBu resolution steps
Output from -12dBu up to +6dBu by 0.5dBu resolution steps
Center Frequency Selectable with 1Hz resolution step from 20Hz up to 20kHz
Bell Filter Q/BW Q from 0.5 up to 10 by 0.1 resolution steps
Low/High Shelving Filter Q/BW Q from 0.5 up to 3 by 0.1 resolution steps
Crossover Section HPF/LPF Butterworth 6/12/18/24/48dB per octave; Linkwitz-Riley 12/24/36/48dB per octave; Bessel 12/24dB per octave. Filter resolution 1Hz
Sophisticated Dynamic Loudness function m 6dB/Octave up to -48dB/Octave including Butterworth, Bessel, Linkwitz-Riley
Output features a precision dynamic range controller composed of a RMS Compressor with selectable ratio and variable knee
Adjustable Delay time up to 40 ms for input channels, and up to 20ms for output channels
Input channel includes a Noise Gate function, Pink/White noise generator, sophisticated Dynamic Loudness function
Output RMS Compressor Threshold from-18dB up to +12dBu;
Knee 0~100%; Ratio from 2:1 to 100:1;
Attack time from 5ms up to 500ms; Release time from 40ms up to 1000ms (10ms resolution). 
Input Noise Generator White/Pink Noise, from -40dB to 0dB
Slipt Band X-over(only High Band)  Freq from 5kHz to 20kHz step 1Hz resolution,
slope: bypass, 1st order butterworth and 2nd order Linkwitz-Riley
DLF Input: On/Off
Output: On/Off, attenuation from -6dB to 0dB, Q from 0.1 to 10 by 0.1dB resolution steps
Delay 10 ms, 10.4us increment/decrement steps per channel

General

User Preset 8
Front Panel GAIN pot. -30dBu ~ 0dBu
PRESET EQ 8 positions Rotary encoder switch
Red LED (Power); Yellow LED (Link); Green LED (Signal presence)
1 x XLR female connector (Input)
1 x XLR male connector (Link Output)
2 x RJ45 connector (M-LAN Rs485)
2 x Locking PowerCON® 20A: AC Mains (blue) - AC Link (white)
Dimensions 19.21“ x 3.15" x 5.98"(488x80x152mm) 
Weight, Net / Shipping 6.09 lbs (2.76 Kg) / 8.83 lb (4 Kg)


  


  • MESSAGE with any questions!!!
    We have distributed PRO AUDIO SPEAKERS and Amplifiers for 20 years.  Go to SpeakersAndAmps 
    We have all the other major PRO Audio Speaker Brands and Models.
    We have many many more than you see here.  We sell to Dealers as well.

Payment & Security

PayPal Venmo

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed