Description
Pascal w/ Marani PDASP2SA2 2.1 Channel Plate Amplifier AUTHORIZED DEALER!!
Outstanding Performance
High power output: 1000W+500W+500W 4Ω
Switched-Mode Power Supply with auto voltage sensing
Pascal Class D Amp Module - full bandwith PWM modulator with ultra low distortion
Full protection circuitry including Over-Current, Over/Under-Voltage, Output DC and Over-Temperature
Excellent sonic performance with 24bit high end converters coupled with 96kHz sample rate
Top-grade DSP Engine
5 band equalization on input channel selected as Hi-Shelving, Bell and Lo-Shelving Variable Q
3 band parametric equalization on Output SUB, selected as Bell
7 band parametric equalization on Output A/B, selected as Bell, Low/High Shelving variable Q
Crossover filters with slopes from 6dB/Octave up to 24dB/Octave including Butterworth, Bessel, Linkwitz-Riley Output channel features a precision dynamic range controller
Adjustable Delay time up to 40 ms for input and 20 ms for output.
Input channel includes a Noise Gate function
Output stages feature dynamic range control composed of RMS Compressor with variable Knee and Ratio
Direct PC/Network Connection
USB connection for system setup, monitoring and control via fully manageable remote PC software
Control
16 Preset Selection by using rotary encoder switch
Security Lockout
High power output: 1000W+500W+500W 4Ω
Switched-Mode Power Supply with auto voltage sensing
Pascal Class D Amp Module - full bandwith PWM modulator with ultra low distortion
Full protection circuitry including Over-Current, Over/Under-Voltage, Output DC and Over-Temperature
Excellent sonic performance with 24bit high end converters coupled with 96kHz sample rate
Top-grade DSP Engine
5 band equalization on input channel selected as Hi-Shelving, Bell and Lo-Shelving Variable Q
3 band parametric equalization on Output SUB, selected as Bell
7 band parametric equalization on Output A/B, selected as Bell, Low/High Shelving variable Q
Crossover filters with slopes from 6dB/Octave up to 24dB/Octave including Butterworth, Bessel, Linkwitz-Riley Output channel features a precision dynamic range controller
Adjustable Delay time up to 40 ms for input and 20 ms for output.
Input channel includes a Noise Gate function
Output stages feature dynamic range control composed of RMS Compressor with variable Knee and Ratio
Direct PC/Network Connection
USB connection for system setup, monitoring and control via fully manageable remote PC software
Control
16 Preset Selection by using rotary encoder switch
Security Lockout
Power & Amplifier section
| Number of Channels | 2.1 |
| Max Output Power at 4 ohms | 1000W+500W+500W at 4Ω |
| Output Circuitry | Pascal Class D - full bandwith PWM modulator with ultra low distortion |
| Output Voltage | 70 Vp / 140 Vpp (unload) / Bridged 140 Vp / 280 Vpp (unloaded) |
| THD at Rated power 4Ω (1kHz) | <0.005% |
| THD at Rated power 8Ω (1kHz) | <0.01% |
| Signal To Noise Ratio | >120 dB (A-weighted, 20 Hz - 20 kHz, 8Ω load) |
| Frequency Response | 20 Hz - 20 kHz ± 0,15 dB (8Ω load, 1 dB below rated power) |
| Damping Factor | >1000 (8Ω load, 1kHz and below) |
| Power Supplies | Universal & regulated switch mode power supply |
| Operating Range | Universal Mains, 85-265V |
| Consumption / Current draw and Thermal dissipation at 230 V | 23W / -A / 78.4 BTU/h (Idle) |
| Protections | Over-Current, Over/Under Voltage, Output DC and Over-Temperature, Short Circuit Protection |
| Analog Input | 1 x XLR electronically balanced, +12dB |
| Analog Output | 1 x XLR electronically balanced (Link) |
| AD & DA Converters | Cs42528 24bit |
| Frequency Response (DSP) | 20 Hz - 20 KHz; -0.5dBu at 20 Hz and 20 kHz |
DSP & Processing
| DSP Engine | MARANI M704 |
| DSP Resolution | 24bit (data) x 24 bit (coeff.),54bit accumulation registers, 96 bit precision on intermediate processing data |
| Parametric Equalization | 5 filters on input channel, selected as Bell, Low/High-Shelving variable Q 3 filters on output SUB channel, selected as Bell 7 filters on output A/B channel, selected as Bell, Low/High-Shelving variable Q |
| Filter Type | Bell, Low/High Shelving Variable Q |
| Filter Gain | Input from -12dBu up to +12dBu by 0.5dBu resolution steps Output from -18dBu up to +18dBu by 0.5dBu resolution steps |
| Center Frequency | Selectable with 1Hz resolution step from 20Hz up to 20kHz |
| Bell Filter Q/BW | Q from 0.5 up to 10 by 0.1 resolution steps |
| Low/High Shelving Filter Q/BW | Q from 0.5 up to 3 by 0.1 resolution steps |
| Crossover Section HPF/LPF | Butterworth 6/12/18/24dB per octave Bessel and Linkwitz-Riley 12/24dB per octave Filter resolution 1Hz steps |
| Output RMS Compressor | Threshold from -18dBu up to +12dBu Knee: 0~100%; Ratio: 2:1~100:1 Release time from 40ms up to 1000ms; Attack time from 5ms up to 100ms tput A/B channel, selected as Bell, Low/High-Shelving variable Q |
| Output Routing | In1, In 2, In 1+2 |
| Delay | up to 40ms for ea ch input, and up to 20ms for each output, with step of 10.4us |
General
| User Preset | 16 |
| Front Panel | Green LED (Power); Yellow LED (Limit); Blue LED (Signal presence) 2 x XLR female connector (Input) 2 x XLR male connector (Link Output) 1 x XLR (MIC Input) 1 x USB Connection 2 x Neutrik® Speakon NL4 (Speaker) 1 x 2*8 LCD 2 x RCA connector(Line Input) 1 x Ground-lift toggle Switch Line Gain Controller MIC Gain Controller 1 x Locking PowerCON® 20A: AC Link (blue) 1 x IEC C13 16A connector; On/Off Power Switch |
| Dimensions | 13.78" x 3.15" x 7.88" (350 x 80 x 200 mm) |
| Weight, Net / Shipping | 6.09 lbs (2.76 Kg) / 8.83 lbs (4 Kg) |
ASK any questions before you buy! We have distributed PRO AUDIO SPEAKERS and Amplifiers for 20 years. Go to SpeakersAndAmps dot com to see!We have all the other major PRO Audio Speaker Brands and Models.We have many many more than you see here. We sell to Dealers as well.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.