| DSP Engine |
1 x MARANI® DSP |
| DSP Resolution |
24 bit (data) x 24 bit (coeff.), 54 bit accumulation registers
96 bit precision on intermediate processing data |
| Parametric Equalization |
12 band parametric equatlization per input
4 band parametric equalization per output |
| FIR for Phase Correction |
Asymmetrical 512 Taps, with coefficients generated by Pc Sw embedded Wizard tool, allowing also FIR latency Adjustment/reduction.
Coefficients can also be imported by external third party applications, so as can be exported to third parties applications |
| Filter Type |
Bell, Shelving, HP/LP, Band Pass, Notch Filter, All Pass |
| Filter Gain |
From -15dBu up to +15dBu by 0.5dBu resolution steps |
| Center Frequency |
Selectable with a 0.5dBu resolution step from 20Hz up to 20kHz |
| Filter Q/BW |
Bell: Q from 0.4 up to 128, steps: 100
Shelving: Q from 0.1 up to 5.1, steps: 100
Bandpass/Notch: Q from 4 up to 104, steps: 100 |
| Input&Output Gain |
-12dB ~ +12dB, resolution: 0.1dBu |
| IIR Crossover section HPF/LPF |
Butterworth 6/12/18/24/36/48dB per octave; Bessel 12/24dB per octave;
Linkwitz-Riley 12/24/36/48dB per octave. |
| FIR Crossover section HPF/LPF |
Hp/Lp/Bp filters, Taps from 256 up to 512, Attenuation up to -120dB, Window type as Rect / Sinc /
Keiser / Hanning / Hamming / Blackman / Nuttal / Sine |
| Noise Generator |
Type: White/Pink Noise; Level: -40dBu ~ 0dBu |
| Input RMS Compressor |
Threshold from -16dBu up to +14dBu; Ratio: 2:1~32:1; Knee: 0~100%;
Attack time from 5ms up to 200ms; Release time from 0.1sec up to 3sec |
| Output Peak Limiter |
Threshold from -16dBu up to +14dBu;
Attack time from 1ms up to 900ms; Release time from 0.1sec up to 5sec |
Head room on Internal Overflow
Process |
12dB |
| Delay |
Each input has up to 500.998ms delay, each output has up to 340.998ms delay |
| Routing |
Full matrix mixing mode |
