Pascal w/ Marani w/FIR PDA515 2-Channel Power Amplifier AUTHORIZED DEALER!!
Pascal w/ Marani w/FIR PDA515 2-Channel Power Amplifier AUTHORIZED DEALER!!
Pascal w/ Marani w/FIR PDA515 2-Channel Power Amplifier AUTHORIZED DEALER!!
Roll over image to zoom in Click on image to zoom
Pascal w/ Marani w/FIR PDA515 2-Channel Power Amplifier AUTHORIZED DEALER!!
Pascal w/ Marani w/FIR PDA515 2-Channel Power Amplifier AUTHORIZED DEALER!!
Pascal w/ Marani w/FIR PDA515 2-Channel Power Amplifier AUTHORIZED DEALER!!

Pascal w/ Marani w/FIR PDA515 2-Channel Power Amplifier AUTHORIZED DEALER!!

Marani
Price:
$699.95

Description

Pascal w/ Marani w/FIR  PDA515 2-Channel Power Amplifier AUTHORIZED DEALER!!


PDA515P is a complete solution dedicated to 1-way or 2-way self-powered loudspeakers. Designed to meet different applications, it provides 2 channels with output power of 500W+150W@4 Ohm . Morever the 2 channels can be bridged into a powerful single channel in order to drive i.e. Subwoofers or Multiple Ways Cabinets with Passive Xovers. In addition it offers a full set of added value features such as on board DSP and RS485 connection for monitoring and control via dedicated PC software. To guarantee maximum reliability, the PDA515P includes a highly efficient universal switch mode power supply with PFC (Power Factor Correction) which provides a total 1kW power to the 2 output channels. The 2 output stages use the Class D module
The PDA515P  includes a set of sophisticated processes for loudspeaker, implemented by the powerful MARANI® DSP running 96kHz/24bit [96 bits precision for the internal intermediate processes] and high performance 24bit AD/DA Converters. Processes as Noise Gate, crossover filters, parametric EQs per input and output sections,RMS compressor, alignment delay are available, all in all everything needed to optimize a self-powered loudspeaker. Morever the Clip/Limiter function per channel provides output monitoring to prevent speaker damage with gentle gain reduction at clip threshold, in addition to the efficient heat dissipation system and Over-Heat protection which themselves ensure uncompromised reliability. Furthermore the PDA515P is also equipped with a Dynamic Loudness function and an useful Pink/White noise generator. All setup parameters for input mixing, DSP features and the limiter setting are accessible by using the remote PC software.

Outstanding Performance High power output: 500W + 150W @ 4Ω  
Switched-Mode Power Supply with PFC and auto voltage sensing
Class D Amp Module - full bandwith PWM modulator with ultra low distortion
Full protection circuitry including Over-Current, Over/Under-Voltage, Output DC and Over-Temperature
Excellent sonic performance with 24bit high end converters coupled with 96kHz sample rate
Top-grade DSP Engine 5 band parametric equalization per input channel
7 band parametric equalization per output channels
2 filter can be switched to Bell, Low/High Shelving, per channel
Low/High Shelving, can be selected as variable Q response
Crossover filters with slopes from 6dB/Octave up to -48dB/Octave including Butterworth, Bessel, Linkwitz-Riley
Output features a precision dynamic range controller composed of a RMS Compressor with selectable ratio and variable knee
Input features a precision dynamic range controller composed of a RMS Compressor with selectable ratio, variable knee and Hold Time.
Adjustable Delay time up to 20 ms for input and output channels
Input channel includes a Noise Gate function, Pink/White noise generator, sophisticated Dynamic Loudness function and a High-Pass filter with slopes from 6dB/Octave up to -48dB/Octave including Butterworth, Bessel, Linkwitz-Riley, and FIR Phase correction up to 640 taps
Direct PC/Network Connection Rs485 connection for system setup, monitoring and control via fully manageable remote PC software
Control Simultaneous control up to 32 units via PC software
8 Preset Selection by using rotary encoder switch
Security Lockout


Power & Amplifier section

Number of Channels 2
Max Output Power @ 4 ohms 500W  + 150W
Output Circuitry Class D - full bandwith PWM modulator with ultra low distortion
Output Voltage +/-70 V (SE Mode unloaded) / Bridged +/-140V(BTL Mode unloaded) 
THD @ Rated power 4Ω (1kHz) <0.005% (20 Hz - 20 kHz, 8Ω load, 3dB below rated power)
Signal To Noise Ratio >120 dB (A-weighted, 20 Hz - 20 kHz, 8Ω load)
Frequency Response 20 Hz - 20 kHz ± 0,15 dB (8Ω load, 1 dB below rated power)
Damping Factor >1000 (8Ω load, 1kHz and below)
Power Supplies Switch mode power supply with PFC (Power Factor Correction) and integral standby converter
Operating Range Universal Mains, 85-265V
Consumption / Current draw and Thermal dissipation @ 230 V 10.2W / -A / 38.3 BTU/h (Idle)
153W / -A / 143.4 BTU/h (I/8 max. power@4Ω)
Protections Over-Current, Over/Under Voltage, Output DC and Over-Temperature, Short Circuit Protection
Analog Input 1 x XLR electronically balanced, +12dB
Analog Output 1 x XLR electronically balanced (Link)
AD & DA Converters 24bit
Frequency Response (DSP) 20 Hz - 20 KHz; -0.5dBu at 20 Hz and 20 kHz

DSP & Processing

DSP Engine MARANI® DSP
DSP Resolution 24bit (data) x 24 bit (coeff.),54bit accumulation registers,  96 bit precision on intermediate processing data
Parametric Equalization 5 filters on input channel 
7 filters per output channel 
Filter Type Bell, Low/High Shelving Variable Q
Filter Gain Input: from -12dBu up to +12dBu by 0.5dBu resolution steps
Output: from -18dBu up to +18dBu by 0.5dBu resolution steps
Center Frequency Selectable with 1Hz resolution step from 20Hz up to 20kHz
Bell Filter Q/BW Q from 0.5 up to 10 by 0.1 resolution steps
Low/High Shelving Filter Q/BW Q from 0.5 up to 3 by 0.1 resolution steps
Crossover Section HPF/LPF Butterworth 6/12/18/24/48dB per octave; Linkwitz-Riley 12/24/36/48dB per octave; Bessel 12/24dB per octave. Filter resolution 1Hz
Sophisticated Dynamic Loudness function and additional High-Pass filter per input section
Input RMS Compressor MakeUp from -12 to +12dBu; Threshold from -18dBu up to +12dBu;
Knee 0~100%; Ratio from 2:1 to 100:1;
Attack time from 5ms up to 500ms; Release time from 40ms up to 1000ms.
Input Hold-Time up to 10sec. 
Output RMS Compressor Threshold from-18dB up to +12dBu; Attack time from 5ms up to 100ms
Release time from 40ms up to 1000ms (10ms resolution)
DLF Input: On/Off;
Output: On/Off;
Attenuation: -6dB ~ 0dB, 0.1 step
Internal Noise Generator White/Pink Noise:-40dB~0dB
Delay 20 ms, 10.4us increment/decrement steps per channel

General

User Preset 8
Front Panel GAIN pot. -30dBu ~ 0dBu
PRESET EQ 8 positions Rotary encoder switch
Red LED (Power); Yellow LED (Link); Green LED (Signal presence)
1 x XLR female connector (Input)
1 x XLR male connector (Link Output)
2 x RJ45 connector (M-LAN Rs485)
2 x Locking PowerCON® 20A: AC Mains (blue) - AC Link (white) 
IEC C13 16A Connector;
Power On/Off swithc
Dimensions 365x85x110 mm
Weight, Net / Shipping 5.84lbs(2.65Kg) / 7.72lbs (3.5Kg)





MESSAGE for any questions
Or go to SpeakersAndAmps dotcom   
  • MESSAGE with any questions!!!
    We have distributed PRO AUDIO SPEAKERS and Amplifiers for 20 years.  Go to SpeakersAndAmps  to see!
    We have all the other major PRO Audio Speaker Brands and Models.
    We have many many more than you see here.  We sell to Dealers as well.

Payment & Security

PayPal Venmo

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed