Pascal W/Marani MDA2-2500P 2-Chan Amp W/Dante Input AUTHORIZED DEALER!!!

Save 36%

Price:
Sale price$2,899.99 Regular price$4,500.00

Description

Pascal W/Marani MDA2-2500P 2-Chan Amp W/Dante Input AUTHORIZED DEALER!!! 

 

MDA2-2500P is a highly flexible, powerful and intelligent 2-Channel power amplifier delivering up to a total of 2x2000W @ 4ohms. Designed to meet the most demanding portable and fixed installation sound systems, it provides a full set of value added features such as high output power, efficient cooling system, on board DSP and USB/Ethernet for monitoring and control via PC software.

MDA2-2500P includes a highly efficient Switch Mode Power Supply, which provides power to the output stages. The 2 output stages use Class D amplifier module-full bandwith PWM modulator obtaining ultra low distortion, high efficiency and also equipped with a full set of circuit protections. Furthermore the Clip/Limiter function provides output monitoring to prevent speaker damage with gentle gain reduction at clip threshold, in addition to the efficient heat dissipation system and Over-Heat protection which themselves ensure uncompromised reliability.

MDA2-2500P is more than just an amplifier. It is also a capable and sophisticated loudspeaker processor, thanks to its powerful MARANI® DSP running 96 kHz / 24 bit [ 96 bits precision for the internal intermediate processes] and high performance 24bit AD/DA Converters. It offers 2 channels of slope up to 48dB/Oct IIR HP/LP crossover filters, or up to 512 taps FIR filters[FIR coefficients can be imported as .txt file from external application] , RMS compressor, parametric Eqs , alignment delay and white/pink noise internal generator, everything needed to optimize a loudspeaker system.

Moreover, MDA2-2500P allows a 12dB headroom process. User can also set the parameters, select input source, load presets, etc with the extraordinary touchscreen LCD in front panel. Apart from regular analog and digital source input, DANTE™ is also optional.

 

Outstanding Performance High power output: 2 x 2000W @ 4Ohm; 2 x 1550W @8ohm
Highly efficient Switch-Mode Power Supply with PFC (Power Factor Correction)
Class D Amp module-full bandwith PWM modulator with ultra low distortion
Full protection circuitry including Over-Current, Over/Under-Voltage, Output DC and Over-Temperature
Excellent sonic performance with 24bit high end converters running 96kHz sample rate
Support DANTE™ audio (optional)
Top-grade DSP Engine 12 band parametric equalization per input channel
4 band parametric equalization per output channel
Each band can be switched to Bell, Low/High Shelving variable Q
Warm Backup is available, by setting source priority and activating "Autoswitch" function in PC Sw
FIR or IIR Filters for X-Over:
The X-Over can be implemented both by FIR filters or IIR HP/LP, selectable in the dedicated PC software
FIR: Crossover filter can be created by the user selecting from 256 up to 512 taps, the FIR type and the Out Band attenuation
        FIR Coefficients can be imported as .txt file from external applications
IIR: Crossover filter with slopes from 6 ~ 48 dB/Octave, including Butterworth, Bessel, Linkwitz-Riley and customized topologies
Each output channel is equipped with a precious Peak Limiter with selectable ratio, attack/release time 
Adjustable Delay time up to 500.998ms for input channel, and 340.998ms for output channel
Each input channel includes a Pink/White noise internal generator, noise gate function, RMS compressor with variable knee, and powerful 12-band PEQ
Direct PC/Network Connection & Control Front panel USB connector for direct PC communications
Ethernet interface for system setup, monitoring and control via manageable remote PC software
Front panel interactive touchscreen LCD display for parametric setting, input source selection, preset loading and so on
Simultaneous control up to 32 units via PC software
50 Preset Selection

Power & Amplifier section

Number of Channels
Max Output Power per Channel 2000W @ 4Ω 
Output Circuitry Class D Amp Module- full bandwith PWM modulator with ultra low distortion
THD @ 90V < 1%
Frequency Response >102 dB (A-weighted, AES-17 filter)
Power Supply Independent Switch mode Power Supply
Operating Range 90 - 245 VAC (50/60Hz); 110/220 VAC is selectable manually
Protections Over-Current, Over/Under Voltage, Output DC and Over-Temperature
Analog Input 2 x XLR electronically balanced, +13dB

DSP & Processing

DSP Engine 1 x MARANI® DSP
DSP Resolution 24 bit (data) x 24 bit (coeff.), 54 bit accumulation registers
96 bit precision on intermediate processing data 
Parametric Equalization 12 band parametric equatlization per input 
4 band parametric equalization per output
FIR for Phase Correction Asymmetrical 512 Taps, with coefficients generated by Pc Sw embedded Wizard tool, allowing also FIR latency Adjustment/reduction.
Coefficients can also be imported by external third party applications, so as can be exported to third parties applications
Filter Type Bell, Shelving, HP/LP, Band Pass, Notch Filter, All Pass
Filter Gain From -15dBu up to +15dBu by 0.5dBu resolution steps
Center Frequency Selectable with a 0.5dBu resolution step from 20Hz up to 20kHz 
Filter Q/BW Bell: Q from 0.4 up to 128, steps: 100
Shelving: Q from 0.1 up to 5.1, steps: 100
Bandpass/Notch: Q from 4 up to 104, steps: 100
Input&Output Gain -12dB ~ +12dB, resolution: 0.1dBu
IIR Crossover section HPF/LPF Butterworth 6/12/18/24/36/48dB per octave; Bessel 12/24dB per octave;
Linkwitz-Riley 12/24/36/48dB per octave.
FIR Crossover section HPF/LPF Hp/Lp/Bp filters, Taps from 256 up to 512, Attenuation up to -120dB, Window type as Rect / Sinc /
Keiser / Hanning / Hamming / Blackman / Nuttal / Sine
Noise Generator Type: White/Pink Noise; Level: -40dBu ~ 0dBu
Input RMS Compressor Threshold from -16dBu up to +14dBu; Ratio: 2:1~32:1; Knee: 0~100%;
Attack time from 5ms up to 200ms; Release time from 0.1sec up to 3sec
Output Peak Limiter Threshold from -16dBu up to +14dBu;
Attack time from 1ms up to 900ms; Release time from 0.1sec up to 5sec
Head room on Internal Overflow
Process
12dB
Delay Each input has up to 500.998ms delay, each output has up to 340.998ms delay
Routing Full matrix mixing mode

General

Device Presets 50
Front Panel LCD display with Touchscreen Function
1 x Red LED (Power)
1 x Rotary encoder push button switches
USB type B connector
Rear Panel 3 x XLR female connector (Input)
2 x Neutrik® Speakon NL4
2 x Ethernet 10/100 TCP-IP (Dante™ Audio Signal: optional)
1 x Ethernet 10/100 TCP-IP (ETHERNET PC Control)
1 x Locking PowerCON® 20A: AC Power Cord (Blue)
1 x 80*80 mm 24V FAN
Dimensions 482X314.5X88mm
Weight, Net / Shipping 11.80 Kg / 13.00 Kg

MESSAGE for any questions

Or go to SpeakersAndAmps dotcom   


  • MESSAGE with any questions!!!We have all the other major PRO Audio Speaker Brands and Models.
  • We have many many more than you see here.  We sell to Dealers as well.
  • We have distributed PRO AUDIO SPEAKERS and Amplifiers for 20 years.  Go to SpeakersAndAmps dotcom to see!

Payment & Security

PayPal Venmo

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed