Pascal Marani PDA500P 500W 2 Channel Power Amplifier Module AUTHORIZED DEALER!!


Price:
Sale price$699.99

Description

Pascal Marani PDA500P


Outstanding Performance High power output: 2 x 500W @ 4Ω  or 1 x 900W @ 8Ω (Bridge Mode) or 1 x 1000W @ 4Ω (BTL mode 4 Ω selected)
Switched-Mode Power Supply with PFC and auto voltage sensing
Pascal Class D Amp Module - full bandwith PWM modulator with ultra low distortion
Full protection circuitry including Over-Current, Over/Under-Voltage, Output DC and Over-Temperature
Excellent sonic performance with 24bit high end converters coupled with 96kHz sample rate
Top-grade DSP Engine 5 band parametric equalization per input channel
7 band parametric equalization per output channels
2 filter can be switched to Bell, Low/High Shelving, per channel
Low/High Shelving, can be selected as variable Q response
Crossover filters with slopes from 6dB/Octave up to -48dB/Octave including Butterworth, Bessel, Linkwitz-Riley
Output features a precision dynamic range controller composed of a RMS Compressor with selectable ratio and variable knee
Input features a precision dynamic range controller composed of a RMS Compressor with selectable ratio, variable knee and Hold Time.
4 Additional All-Pass filter up to 2nd order per output channel
Adjustable Delay time up to 10 ms for input and output channels
Input channel includes a Noise Gate function, Pink/White noise generator, sophisticated Dynamic Loudness function and a High-Pass filter with slopes from 6dB/Octave up to -48dB/Octave including Butterworth, Bessel, Linkwitz-Riley 
Direct PC/Network Connection Rs485 connection for system setup, monitoring and control via fully manageable remote PC software
Control Simultaneous control up to 32 units via PC software
8 Preset Selection by using rotary encoder switch
Security Lockout

Power & Amplifier section

Number of Channels 2
Max Output Power @ 8 ohms 2 x 250W              1 x 900W (Bridge)
Max Output Power @ 4 ohms 2 x 500W              1 x 1000W (4Ω BTL Mode Selected)
Output Circuitry Class D - full bandwith PWM modulator with ultra low distortion
Output Voltage +/-70 V (SE Mode unloaded) / Bridged +/-140V(BTL Mode unloaded) 
THD @ Rated power 4 (1kHz) <0.005% (20 Hz - 20 kHz, 8Ω load, 3dB below rated power)
Signal To Noise Ratio >120 dB (A-weighted, 20 Hz - 20 kHz, 8Ω load)
Frequency Response 20 Hz - 20 kHz ± 0,15 dB (8Ω load, 1 dB below rated power)
Damping Factor >1000 (8Ω load, 1kHz and below)
Power Supplies Switch mode power supply with PFC (Power Factor Correction) and integral standby converter
Operating Range Universal Mains, 85-265V
Consumption / Current draw and Thermal dissipation @ 230 V 11.2W / -A / 38.3 BTU/h (Idle)
173W / -A / 143.4 BTU/h (I/8 max. power@4Ω)
Protections Over-Current, Over/Under Voltage, Output DC and Over-Temperature, Short Circuit Protection
Analog Input 1 x XLR electronically balanced, +12dB
Analog Output 1 x XLR electronically balanced (Link)
AD & DA Converters Cs42528 24bit
Frequency Response (DSP) 20 Hz - 20 KHz; -0.5dBu at 20 Hz and 20 kHz

DSP & Processing

DSP Engine MARANI M704
DSP Resolution 24bit (data) x 24 bit (coeff.),54bit accumulation registers,  96 bit precision on intermediate processing data
Parametric Equalization 5 filters on input channel 
7 filters per output channel 
Filter Type Bell, Low/High Shelving Variable Q
Filter Gain From -12dBu up to +6dBu by 0.5dBu resolution steps
Center Frequency Selectable with 1Hz resolution step from 20Hz up to 20kHz
Bell Filter Q/BW Q from 0.5 up to 10 by 0.1 resolution steps
Low/High Shelving Filter Q/BW Q from 0.5 up to 3 by 0.1 resolution steps
Crossover Section HPF/LPF Butterworth 6/12/18/24/48dB per octave; Linkwitz-Riley 12/24/36/48dB per octave; Bessel 12/24dB per octave. Filter resolution 1Hz
Sophisticated Dynamic Loudness function and additional High-Pass filter per input section
Input RMS Compressor MakeUp from -12 to +12dBu; Threshold from -18dBu up to +12dBu;
Knee 0~100%; Ratio from 2:1 to 100:1;
Attack time from 5ms up to 500ms; Release time from 40ms up to 1000ms.
Input Hold-Time up to 10sec. 
Output RMS Compressor Drive from -12 to 6dBu; Threshold from-18dB up to +12dBu; Attack time from 5ms up to 500ms; Knee 0~100%; Ratio from 2:1 to 100:1; Release time from 40ms up to 1000ms (10ms resolution)
Clip Limiter Bypass, soft and Hard Threshold
Slipt Band X-over(only High Band)  Freq from 5kHz to 20kHz step 1Hz resolution,
slope: bypass, 1st order butterworth and 2nd order Linkwitz-Riley
Delay 10 ms, 10.4us increment/decrement steps per channel

General

User Preset 8
Front Panel GAIN pot. -30dBu ~ 0dBu
PRESET EQ 8 positions Rotary encoder switch
Red LED (Power); Yellow LED (Link); Green LED (Signal presence)
1 x XLR female connector (Input)
1 x XLR male connector (Link Output)
2 x RJ45 connector (M-LAN Rs485)
2 x Locking PowerCON® 20A: AC Mains (blue) - AC Link (white) 
Dimensions 13,99"x 2,8"x 6,11" (355x70x155mm)
Weight, Net / Shipping 3.52 lbs (1.6 Kg) / 4.96 lbs (2.5 Kg)
ASK any questions before you buy!
Or go to SpeakersAndAmps dotcom   



  • ASK any questions before you buy!
    We have distributed PRO AUDIO SPEAKERS and Amplifiers for 20 years.  Go to SpeakersAndAmps dotcom to see!
    We have all the other major PRO Audio Speaker Brands and Models.
    We have many many more than you see here.  We sell to Dealers as well.

Payment & Security

PayPal Venmo

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed