Pascal Marani PDA330I 3 Channel Power Amplifier Module AUTHORIZED DEALER!!!
Pascal Marani PDA330I
Outstanding Performance High power output: 300W 4Ω (Sub) or 2 x 300W 4Ω (Statellites) Switched-Mode Power Supply with auto voltage sensing ICEPower Class D Amp Module - full bandwith PWM modulator with ultra low distortion Full protection circuitry including Over-Current, Over/Under-Voltage, Output DC and Over-Temperature Excellent sonic performance with 24bit high end converters coupled with 96kHz sample rate Top-grade DSP Engine 5 band equalization on input channel selected as Hi-Shelving, Bell and Lo-Shelving Variable Q 3 band parametric equalization on Output SUB, selected as Bell 7 band parametric equalization on Output A/B, selected as Bell, Low/High Shelving variable Q Crossover filters with slopes from 6dB/Octave up to 24dB/Octave including Butterworth, Bessel, Linkwitz-Riley Output channel features a precision dynamic range controller Adjustable Delay time up to 40 ms for input and 20 ms for output. Input channel includes a Noise Gate function Output RMS Compressor Direct PC/Network Connection USB connection for system setup, monitoring and control via fully manageable remote PC software Control 16 Preset Selection Security Lockout
Power & Amplifier Function
Number of Channels
Max Output Power 4 ohms
300w/4Ohm (Sub) + 2x300w/4Ohm (Satellites)
Class D - full bandwith PWM modulator with ultra low distortion
20 Hz - 20 kHz ± 0, 15 dB (8Ω load, 1 dB below rated power)
>1000 (8Ω load, 1kHz and below)
Switch mode power supply with PFC (Power Factor Correction) and integral standby converter
Universal Mains, 85-268V (dual voltage auto selection)
Consumption / Current draw and Thermal dissipation 230 V
23W / -A / 78.8 BTU/h (Idle)
Over-Current, Over/Under Voltage, Output DC and Over-Temperature
1 x XLR electronically balanced, +12dB
1 x XLR electronically balanced (Link)
AD & DA Converters
Frequency Response (DSP)
20 Hz - 20 KHz; -0.5dBu at 20 Hz and 20 kHz
DSP & Processing
24bit (data) x 24 bit (coeff.),54bit accumulation registers, 96 bit precision on intermediate processing data
5 filters on input channel, selected as Bell, Low/High-Shelving variable Q 3 filters on output SUB channel, selected as Bell 7 filters on output A/B channel, selected as Bell, Low/High-Shelving variable Q
Bell, Low/High Shelving variable Q
Input from -12dBu up to +12dBu by 0.5dBu resolution steps Output from -18dBu up to +18dBu by 0.5dBu resolution steps
Selectable with a 1Hz resolution step from 20Hz up to 20kHz
Bell Filter Q/BW
Q from 0.5 up to 10 by 0.1 resolution steps
High/Low Shelving Filter Q/BW
Q from 0.5 up to 3 by 0.1 resolution steps
Crossover section HPF/LPF
Butterworth 6/12/18/24dB per octave Bessel and Linkwitz-Riley 12/24dB per octave Filter resolution 1Hz
Output RMS Compressor
Threshold from -18dBu up to +12dBu Knee: 0~100%; Ratio: 2:1~100:1 Release time from 40ms up to 1000ms; Attack time from 5ms up to 100ms
In1, In 2, In 1+2
up to 40ms for ea ch input, and up to 20ms for each output, with step of 10.4us
Green LED (Power); Yellow LED (Limit); Blue LED (Signal presence) 2 x XLR female connector (Input) 2 x XLR male connector (Link Output) 1 x XLR (MIC Input) USB Connection 2 x Neutrik® Speakon NL4 (Speaker) 2 x 8 LCD 2 x RCA (Line Input) 1 x Ground-lift toggle Switch Line Gain Controller MIC Gain Controller 1 x Locking PowerCON® 20A: AC Link (blue) 1 x IEC C13 16A connector; On/Off Power Switch
13.39" x 3.15" x 7.48" (340 x 80 x 190 mm)
Weight, Net / Shipping
6.09 lbs (2.76 Kg) / 8.83 lbs (4 Kg)
ASK any questions before you buy!
Or go to SpeakersAndAmps dot com
ASK any questions before you buy!
We have distributed PRO AUDIO SPEAKERS and Amplifiers for 20 years. Go to SpeakersAndAmps dot com to see!
We have all the other major PRO Audio Speaker Brands and Models.
We have many many more than you see here. We sell to Dealers as well.