Marani DPA260P 2 In - 6 Out Speaker Management System AUTHORIZED DEALER!!!
|
Audio
| Analog Input |
2 x XLR electronically balanced |
| Analog Output |
6 x XLR electronically balanced |
| Digital Input |
1 SPDIF; Gain 0dBu |
| Minimun Load |
150 ohm |
| THD+N |
0.001% at 1kHz 0dBu |
| S/N |
>106 dBA |
| Frequency Response |
20Hz – 20kHz; -0.5dBu at 20Hz and 20kHz |
| AD & DA Converters |
24bit |
DSP & Processing
| DSP Engine |
MARANI® DSP |
| DSP Resolution |
24×32 bit for filtering process
96 bits resolution on intermediate computation results |
| Parametric Equalization |
11 filters per input selected as Bell or Shelving
7 filters per output selected as Bell or Shelving |
| Filter Type |
Bell, Shelving |
| Filter Gain |
From -12dBu up to +12dBu by 0.5dBu resolution steps |
| Center Frequency |
Selectable with a 1/24th of octave resolution step from 20Hz up to 20kHz |
| Filter Q/BW |
Q from 0.4 up to 12 by 0.1 resolution steps |
| Crossover Section HPF/LPF |
Butterworth 6/12/18/24 dB per octave
Bessel 12/24 dB per octave
Linkwitz-Riley 12/24/36/48 dB per octave |
| Internal Noise Generator |
White/Pink Noise, level from -30dBu to 0dBu |
| Input Noise Gate |
Threshold from -90 dBu up to -60 dBu |
| RMS Compressor |
Threshold from -14 dBu up to +16dBu
Ratio: 2:1~100:1; Knee: 0%~100%
Attack time from 5ms up to 200ms
Release time from 0.1 sec up to 3 sec |
| Delay |
900 ms for every input channel and 340 ms for every output channel |
| Ground Noise |
-89 dBu |
General
| Device Presets |
48 User Presets |
| Front Panel |
2x24 character LCD display with green LED backlight
7-LED meter per input channel -20dBu to +15dBu, clip
7-LED meter per output channel -15dBu to +15dBu, clip or limiter mode
Blue LED (Edit) and Red LED (Mute) per channel
NAV/PM1 Rotary encoder push button switch
PM2, PM3, ENTER, ESC, UTILITY push button switches
EDIT/MUTE push button per channel
USB type B connector |
| Rear Panel |
2 x XLR female connector (Input)
6 x XLR male connector (Output)
1 x XLR female connector for RS485 (Input)
1 x XLR male connector for RS485 (Output)
2 x Ground-lift toggle switch
IEC C13 16A connector; Power on/off switch |
| Main AC |
90-240VAC (50/60Hz) – 40W |
| Dimensions |
19”x 1.75”x 9” (483x44x229mm) 1RU |
| Weight, Net / Shipping |
7.71 lbs (3.5 Kg) / 8.82 lb (4 Kg) |
|
ASK any questions before you buy!
Or go to SpeakersAndAmps
|
-
ASK any questions before you buy!We have all the other major PRO Audio Speaker Brands and Models.
- We have many many more than you see here. We sell to Dealers as well.
- We have distributed PRO AUDIO SPEAKERS and Amplifiers for 20 years. Go to SpeakersAndAmps dot com to see!
|
