Marani DPA240P
| Outstanding Performance |
Excellent sonic performance with 24bit high end converters coupled with 48kHz sample rate
2 inputs, 4 outputs with full matrix mixing |
| Top-grade DSP Engine |
11 band parametric equalization per input channel
7 band parametric equalization per output channel
Each band can be switched to Bell, Shelving
Crossover filters with slopes from 6dB/Octave up to 48dB/ Octave including Butterworth, Bessel, Linkwitz-Riley
Each output features a dynamic range controller composed of a Peak Limiter and RMS Compressor
Adjustable Delay time up to 900 ms for every input channel
up to 340ms for every output channel
Phase correction per Input and output channel |
| Direct PC/Network Connection |
Rear panel USB connector for direct PC communications
RS485 connection for system setup, monitoring and control via fully manageable remote PC software |
| Control |
Front panel interactive LCD display for local access and configuration
Front panel 7-LED level meter indicators per channel
Simultaneous control up to 32 units via PC software
Up to 48 storable user presets
Security Lockout |
Audio
| Analog Input |
2 x XLR electronically balanced |
| Analog Output |
4 x XLR electronically balanced |
| Minimun Load |
150 ohm |
| THD+N |
0.001% at 1kHz 0dBu |
| S/N |
>106 dBA |
| Frequency Response |
20Hz – 20kHz; -0.5dBu at 20Hz and 20kHz |
| AD & DA Converters |
24bit |
DSP & Processing
| DSP Engine |
MARANI® DSP |
| DSP Resolution |
24bit (data) x 24 bit (coeff.),54bit accumulation registers, 96 bit precision on intermediate processing data |
| Parametric Equalization |
11 filters per input selected as Bell or Shelving
7 filters per output selected as Bell or Shelving |
| Input Gain |
From -12dB to +12dB by 0.1dBu resolution steps |
| Output Gain |
From -12dB to +18dB by 0.1dBu resolution steps |
| Filter Type |
Bell, Shelving |
| Filter Gain |
Input from -18dB to +12dB by 0.1dBu resolution steps;
Output from -18dB to +18dB by 0.1dBu resolution steps; |
| Center Frequency |
Selectable with a 1Hz resolution step from 20Hz up to 20kHz |
| Filter Q/BW |
Q from 0.4 up to 128 |
| Crossover Section HPF/LPF |
Butterworth 6/12/18/24 dB per octave
Bessel 12/24 dB per octave
Linkwitz-Riley 12/24/36/48 dB per octave |
| Internal Noise Generator |
White/Pink Noise, level from -30dBu to 0dBu |
| Input Noise Gate |
Threshold from -90 dBu up to -60 dBu
Attack time from 1ms up to 1000ms; Release time from 10ms up to 1000ms rom -18dB to +18dB by 0.1dBu resolution steps; |
| Input RMS Compressor |
Threshold from -14 dBu up to +16dBu and Byp
Ratio: 2:1~100:1; Knee: 0%~100%
Attack time from 5ms up to 200ms
Release time from 0.1 sec up to 3 sec |
| Output RMS Compressor(if selected) |
Threshold from -14dBu up to +16dBu and Byp
Ration 2:1~100:1; Knee: 0% ~ 100%
Attack time from 5ms up to 200ms;Release time from 0.1 sec up to 3 sec |
| Output Peak Limiter(if selected) |
Threshold from -14dBu up to +16dBu and Byp
Attack time from 5ms up to 200ms;Release time from 0.1 sec up to 3 sec Release time from 0.1 sec up to 3 sec |
| DLF |
Input: Boost Filter from 0% to 100%;Frequency from 20Hz to 20kHz;
Output(Only for output 1,3): Attenuation Filter from 0dBu to -6dBu;Frequency from 20Hz to 1kHz
Q from 1 to 9.9 step 0.1 |
| Delay |
900 ms for every input channel and 340 ms for every output channel |
| Ground Noise |
-90 dBu |
General
| Device Presets |
48 User Presets |
| Front Panel |
2x24 character LCD display with green LED backlight
7-LED meter per input channel -15dBu to +15dBu, clip and limiter mode
7-LED meter per output channel -15dBu to +15dBu, clip or limiter mode
Blue LED (Edit) and Red LED (Mute) per channel
NAV/PM1 Rotary encoder push button switch
PM2, PM3, ENTER, ESC, UTILITY push button switches
EDIT/MUTE push button per channel
USB type B connector |
| Rear Panel |
2 x XLR female connector (Input)
4 x XLR male connector (Output)
1 x XLR female connector for RS485 (Input)
1 x XLR male connector for RS485 (Output)
2 x Ground-lift toggle switch
IEC C13 16A connector; Power on/off switch |
| Main AC |
90-240VAC (50/60Hz) – 40W |
| Dimensions |
19”x 1.75”x 9” (483x44x229mm) 1RU |
| Weight, Net / Shipping |
7.71 lbs (3.5 Kg) / 8.82 lb (4 Kg) |
|
|
|
|
|
|
|
|
|
|
ASK any questions before you buy!
Or go to SpeakersAndAmps
|
-
ASK any questions before you buy!We have all the other major PRO Audio Speaker Brands and Models.
- We have many many more than you see here. We sell to Dealers as well.
- We have distributed PRO AUDIO SPEAKERS and Amplifiers for 20 years. Go to SpeakersAndAmps
|
