Marani DPA 480 Series
DSP Speaker Management
Upgraded Specs on 480 version
Better than DPA 480P
|
Outstanding Performance
|
Excellent sonic performance with 24bit high end converters coupled with 48kHz sample rate
4 inputs, 8 outputs with full matrix mixing
|
|
Top-grade DSP Engine
|
30 band parametric equalization per input channel
11 band parametric equalization per output channel
Each band can be switched to Bell, Hi/Lo-Shelving, HP/LP, Band Pass, Notch and All Pass filters
Crossover filters with slopes from 6dB/Octave up to 48dB/ Octave including Butterworth, Bessel, Linkwitz-Riley
Each output features a precision dynamic range controller composed of a Peak Limiter
Adjustable Delay time up to 420.998 ms for every input and up to 128.998 ms for each output channel
|
|
Direct PC/Network Connection
|
Front panel USB connector for direct PC communications
RS485 connection for system setup, monitoring and control via fully manageable remote PC software
|
|
Control
|
Front panel interactive LCD display for local access and configuration
Front panel 7-LED level meter indicators per channel
Simultaneous control up to 32 units via PC software
Up to 24 storable user presets
Security Lockout
|
|
|
|
|
|
|
|
|
Audio
| Analog Input |
4 x XLR electronically balanced |
| Analog Output |
8 x XLR electronically balanced |
| Minimun Load |
150 ohm |
| THD+N |
0.001% at 1kHz 0dBu |
| S/N |
>110 dBA |
| Frequency Response |
20Hz – 20kHz; -0.5dBu at 20Hz and 20kHz |
| AD & DA Converters |
CS42528 24bit -48kHz |
DSP & Processing
| DSP Engine |
MARANI M716 |
| DSP Resolution |
24bit (data) x 24 bit (coeff.), 54 bit accumulation registers
96 bit precision on intermediate processing data
|
| Parametric Equalization |
30 filters per input
11 filters per output
|
| Filter Type |
Bell, Hi/Lo-Shelving, HP/LP, Band Pass, Notch and All Pass Filters selectable
|
| Filter Gain |
From -15dBu up to +15dBu by 0.5dBu resolution steps
|
| Input&Output Level |
From -18dBu up to +18dBu by 0.1dBu resolution steps |
| Center Frequency |
Selectable with a 1/48th of octave resolution step from 20Hz up to 20kHz |
| Filter Q/BW |
Shelving/HP/LP Q from 0.1 up to 5.1;
BP/Notch/All Pass Q from 4 up to 104
Bell Q from 0.4 to 128
|
| Crossover Section HPF/LPF |
Butterworth 6/12/18/24 dB per octave
Bessel 12/24 dB per octave
Linkwitz-Riley 12/24/36/48 dB per octave |
| Input Noise Gate |
Threshold from -80dBu up to -50dBu
Attack time from 1ms up to 1000ms;Release time from 10ms up to 1000ms
|
| Input RMS Compressor |
Threshold from -14dBu up to +16dBu and Byp
Ratio 2:1~32:1; Knee: 0% ~ 100%; Makeup from -12dB to +12dB
Attack time from 5ms up to 200ms;Release time from 0.1 sec up to 3 sec
|
| Output Peak Limiter |
Threshold from -14dBu up to +16dBu and Byp
Attack time from 1ms up to 900ms;Release time from 0.1 sec up to 5 sec
|
| Input/Output Polarity |
Normal (0°) / Inverted (180°)
|
| Input/Output Mute |
Off / On
|
| Delay |
480 ms per input channel
- 270 ms per output channel
|
General
| Device Presets |
24 User Presets |
| Front Panel |
2x24 character LCD display with green LED backlight
7-LED meter per input channel -20dBu to +15dBu, clip
7-LED meter per output channel -15dBu to +15dBu, clip or limiter mode
Blue LED (Edit) and Red LED (Mute) per channel
NAV/PM1 Rotary encoder push button switch
PM2, PM3, ENTER, ESC, UTILITY push button switches
EDIT/MUTE push button per channel
USB type B connector |
| Rear Panel |
4 x XLR female connector (Input)
8 x XLR male connector (Output)
2 x RS485 Connector
1 x Ground-lift toggle switch
IEC C13 16A connector; Power on/off switch |
| Main AC |
90-240VAC (50/60Hz) – 40W |
| Dimensions |
19”x 1.75”x 9” (483x44x229mm) 1RU |
| Weight, Net / Shipping |
7.71 lbs (3.5 Kg) / 8.82 lb (4 Kg) |
ASK any questions before you buy!
|
-
ASK any questions before you buy!We have all the other major PRO Audio Speaker Brands and Models.
- We have many many more than you see here. We sell to Dealers as well.
- We have distributed PRO AUDIO SPEAKERS and Amplifiers for 20 years.
|
|
Skip to content
