PAS RS 2.2 - Professional Concert System PA Speakers - 3 way - PA Quality!!! OR Studio QUality with Radian Driver

PAS (PROFESSIONAL AUDIO SYSTEMS)  RS 2.2   15" Coax woofer and B&C Driver

and 15" High Power Woofer - Eminence or Faital PRO

S-1, The reason the RS-1 has been the most popular installation loudspeaker manufactured by PAS is clear: high definition in a compact package, extended bandwidth and ease of installation. Concentric speaker design, precision crossover filters and dual 15 inch long excursion woofers create a one box extended loudspeaker that is unsurpassed in vocal reinforcement and music playback. The RS-1 features: • Concentric 15” loudspeaker. • Extended high frequency 1” compression driver. • Supplementary 15” woofer for extended low frequencies. • Passive dividing network with Time Offset Correction (TOC™) and equalization. • Baltic birch cabinet construction. • Foam backed steel grille. • Recessed handles. • Fly hardware (anchor plate or optional truss array w/steel reinforcement). • Compact enclosure for ease in installation. RS-1 Specifications: Frequency Response: 40 to 16kHz Power Rating: *600 watts Nominal Impedance: 4 ohm Sensitivity (1w/1m): 99 dB Maximum SPL: 127 dB @1meter (@ rated power) Nominal Coverage Angles: 60ºH x 40º V, above 2 kHz Crossover Frequency: 1.2 kHz L.F. Drivers: CXL-1580C & HL-1580C H.F. Driver: DE 45/8 Input Connectors: 2 x NL4 Dimensions: 35.35” H x 17.25”W x 24”D Weight: 116 lbs Due to limitations of the passive dividing networks the long term average power rating of the concentric section is limited to 200 watts (40 volts into 8 ohms). Since the RS-1 and RS-1.2 have a supplemental 15” driver, their nominal impedance is 4 ohms. The long term average power rating of these cabinets is 400 watts (40 volts into 4 ohms). This in no way affects their transient capabilities. PAS recommends amplifiers that produce at least twice this power (800 watts into 4 ohms) for these cabinets. Since the RS-2.2 does not contain a dividing network, it does not have this limitation. RS-1.2, Since it’s introduction in early 1996, the RS-1.2 has become the most popular system in the TOC™ line. The RS-1.2 uses a 2 inch throat compression driver. The higher sensitivity and greater power handling of this driver results in 9 dB more high frequency headroom than systems with 1 inch drivers. The results are increased clarity, intelligibility and greater throw. A precision passive dividing network and single amplifier connection allows for ease of installation.

The RS-1.2 features are similar to the RS-1 with these differences: • Concentric 4” voice coil 15” loud speaker. • Extended high frequency 2” compression driver. • Supplementary 4” voice coil 15” woofer for extended low frequencies. RS-1.2 Specifications: Frequency Response: 40 to 16kHz Power Rating: *800 watts Nominal Impedance: 4 ohm Sensitivity (1w/1m): 100 dB Maximum SPL: 128 dB @1meter (@ rated power) Nominal Coverage Angles: 60º H x 40º V, above 2 kHz Crossover Frequency: 1.2 kHz L.F. Drivers: CXL-2580C & HL-2580C H.F. Driver: DE 750/8 Input Connectors: 2 x NL4 Dimensions: 35.35” H x 17.25”W x 24”D Weight: 128 lbs

RS-2.2, When maximum reliability and SPL is required, the RS-2.2 is the choice. Used with the TOC™ R2 processor, the RS-2.2 contains the same components as the RS-1.2 (minus the passive network) and gets the greatest performance out of them. The TOC™ R2 processor contains: four pole linear phase dividing filters, precise equalization, Time Offset Correction (TOC™) and limiters. The RS-2.2 features are similar to the RS-1.2 with this difference: • Contains no passive dividing network since the system is intended to be biamplified. RS-2.2 Specifications: Frequency Response: 40 to 16kHz Power Rating: *1000 watts HF: 100 watts Nominal Impedance: 4 ohm HF: 8 ohms Sensitivity (1w/1m): 100 dB Maximum SPL: 129 dB @1meter (@ rated power) Nominal Coverage Angles: 60º H x 40º V, above 2 kHz Crossover Frequency: 1.2 kHz L.F. Drivers: CXL-2580C & HL-2580C H.F. Driver: DE 750/8 Input Connectors: 2 x NL4 Dimensions: 35.35” H x 17.25”W x 24”D Weight: 124 lbs Subwoofers The TOC™ subwoofers CB-2 or RS-2BB can be used to supplement and extend the low frequencies of these cabinet.