-
ASK any questions before you buy!We have distributed PRO AUDIO SPEAKERS and Amplifiers for 20 years. Go to SpeakersAndAmps dotcom to see!We have all the other major PRO Audio Speaker Brands and Models.We have many many more than you see here. We sell to Dealers as well.
Description
Pascal W/ Marani PDA500P 500W 2 Channel Plate Amplifier AUTHORIZED DEALER!!
| Outstanding Performance | High power output: 2 x 500W @ 4Ω or 1 x 900W @ 8Ω (Bridge Mode) or 1 x 1000W @ 4Ω (BTL mode 4 Ω selected) Switched-Mode Power Supply with PFC and auto voltage sensing Pascal Class D Amp Module - full bandwith PWM modulator with ultra low distortion Full protection circuitry including Over-Current, Over/Under-Voltage, Output DC and Over-Temperature Excellent sonic performance with 24bit high end converters coupled with 96kHz sample rate |
| Top-grade DSP Engine | 5 band parametric equalization per input channel 7 band parametric equalization per output channels 2 filter can be switched to Bell, Low/High Shelving, per channel Low/High Shelving, can be selected as variable Q response Crossover filters with slopes from 6dB/Octave up to -48dB/Octave including Butterworth, Bessel, Linkwitz-Riley Output features a precision dynamic range controller composed of a RMS Compressor with selectable ratio and variable knee Input features a precision dynamic range controller composed of a RMS Compressor with selectable ratio, variable knee and Hold Time. 4 Additional All-Pass filter up to 2nd order per output channel Adjustable Delay time up to 10 ms for input and output channels Input channel includes a Noise Gate function, Pink/White noise generator, sophisticated Dynamic Loudness function and a High-Pass filter with slopes from 6dB/Octave up to -48dB/Octave including Butterworth, Bessel, Linkwitz-Riley |
| Direct PC/Network Connection | Rs485 connection for system setup, monitoring and control via fully manageable remote PC software |
| Control | Simultaneous control up to 32 units via PC software 8 Preset Selection by using rotary encoder switch Security Lockout |
Power & Amplifier section
| Number of Channels | 2 |
| Max Output Power @ 8 ohms | 2 x 250W 1 x 900W (Bridge) |
| Max Output Power @ 4 ohms | 2 x 500W 1 x 1000W (4Ω BTL Mode Selected) |
| Output Circuitry | Class D - full bandwith PWM modulator with ultra low distortion |
| Output Voltage | +/-70 V (SE Mode unloaded) / Bridged +/-140V(BTL Mode unloaded) |
| THD @ Rated power 4Ω (1kHz) | <0.005% (20 Hz - 20 kHz, 8Ω load, 3dB below rated power) |
| Signal To Noise Ratio | >120 dB (A-weighted, 20 Hz - 20 kHz, 8Ω load) |
| Frequency Response | 20 Hz - 20 kHz ± 0,15 dB (8Ω load, 1 dB below rated power) |
| Damping Factor | >1000 (8Ω load, 1kHz and below) |
| Power Supplies | Switch mode power supply with PFC (Power Factor Correction) and integral standby converter |
| Operating Range | Universal Mains, 85-265V |
| Consumption / Current draw and Thermal dissipation @ 230 V | 11.2W / -A / 38.3 BTU/h (Idle) 173W / -A / 143.4 BTU/h (I/8 max. power@4Ω) |
| Protections | Over-Current, Over/Under Voltage, Output DC and Over-Temperature, Short Circuit Protection |
| Analog Input | 1 x XLR electronically balanced, +12dB |
| Analog Output | 1 x XLR electronically balanced (Link) |
| AD & DA Converters | Cs42528 24bit |
| Frequency Response (DSP) | 20 Hz - 20 KHz; -0.5dBu at 20 Hz and 20 kHz |
DSP & Processing
| DSP Engine | MARANI M704 |
| DSP Resolution | 24bit (data) x 24 bit (coeff.),54bit accumulation registers, 96 bit precision on intermediate processing data |
| Parametric Equalization | 5 filters on input channel 7 filters per output channel |
| Filter Type | Bell, Low/High Shelving Variable Q |
| Filter Gain | From -12dBu up to +6dBu by 0.5dBu resolution steps |
| Center Frequency | Selectable with 1Hz resolution step from 20Hz up to 20kHz |
| Bell Filter Q/BW | Q from 0.5 up to 10 by 0.1 resolution steps |
| Low/High Shelving Filter Q/BW | Q from 0.5 up to 3 by 0.1 resolution steps |
| Crossover Section HPF/LPF | Butterworth 6/12/18/24/48dB per octave; Linkwitz-Riley 12/24/36/48dB per octave; Bessel 12/24dB per octave. Filter resolution 1Hz Sophisticated Dynamic Loudness function and additional High-Pass filter per input section |
| Input RMS Compressor | MakeUp from -12 to +12dBu; Threshold from -18dBu up to +12dBu; Knee 0~100%; Ratio from 2:1 to 100:1; Attack time from 5ms up to 500ms; Release time from 40ms up to 1000ms. Input Hold-Time up to 10sec. |
| Output RMS Compressor | Drive from -12 to 6dBu; Threshold from-18dB up to +12dBu; Attack time from 5ms up to 500ms; Knee 0~100%; Ratio from 2:1 to 100:1; Release time from 40ms up to 1000ms (10ms resolution) |
| Clip Limiter | Bypass, soft and Hard Threshold |
| Slipt Band X-over(only High Band) | Freq from 5kHz to 20kHz step 1Hz resolution, slope: bypass, 1st order butterworth and 2nd order Linkwitz-Riley |
| Delay | 10 ms, 10.4us increment/decrement steps per channel |
General
| User Preset | 8 |
| Front Panel | GAIN pot. -30dBu ~ 0dBu PRESET EQ 8 positions Rotary encoder switch Red LED (Power); Yellow LED (Link); Green LED (Signal presence) 1 x XLR female connector (Input) 1 x XLR male connector (Link Output) 2 x RJ45 connector (M-LAN Rs485) 2 x Locking PowerCON® 20A: AC Mains (blue) - AC Link (white) |
| Dimensions | 13,99"x 2,8"x 6,11" (355x70x155mm) |
| Weight, Net / Shipping | 3.52 lbs (1.6 Kg) / 4.96 lbs (2.5 Kg) |
ASK any questions before you buy!
Or go to SpeakersAndAmps
|
|
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.