High power output: 2 x 500W @ 4Ω or 1 x 900W @ 8Ω (Bridge Mode) or 1 x 1000W @ 4Ω (BTL mode 4 Ω selected) Switched-Mode Power Supply with PFC and auto voltage sensing Pascal Class D Amp Module - full bandwith PWM modulator with ultra low distortion Full protection circuitry including Over-Current, Over/Under-Voltage, Output DC and Over-Temperature Excellent sonic performance with 24bit high end converters coupled with 96kHz sample rate
Top-grade DSP Engine
5 band parametric equalization per input channel 7 band parametric equalization per output channels 2 filter can be switched to Bell, Low/High Shelving, per channel Low/High Shelving, can be selected as variable Q response Crossover filters with slopes from 6dB/Octave up to -48dB/Octave including Butterworth, Bessel, Linkwitz-Riley Output features a precision dynamic range controller composed of a RMS Compressor with selectable ratio and variable knee Input features a precision dynamic range controller composed of a RMS Compressor with selectable ratio, variable knee and Hold Time. 4 Additional All-Pass filter up to 2nd order per output channel Adjustable Delay time up to 10 ms for input and output channels Input channel includes a Noise Gate function, Pink/White noise generator, sophisticated Dynamic Loudness function and a High-Pass filter with slopes from 6dB/Octave up to -48dB/Octave including Butterworth, Bessel, Linkwitz-Riley
Direct PC/Network Connection
Rs485 connection for system setup, monitoring and control via fully manageable remote PC software
Simultaneous control up to 32 units via PC software 8 Preset Selection by using rotary encoder switch Security Lockout
Power & Amplifier section
Number of Channels
Max Output Power @ 8 ohms
2 x 250W 1 x 900W (Bridge)
Max Output Power @ 4 ohms
2 x 500W 1 x 1000W (4Ω BTL Mode Selected)
Class D - full bandwith PWM modulator with ultra low distortion
+/-70 V (SE Mode unloaded) / Bridged +/-140V(BTL Mode unloaded)
20 Hz - 20 kHz ± 0,15 dB (8Ω load, 1 dB below rated power)
>1000 (8Ω load, 1kHz and below)
Switch mode power supply with PFC (Power Factor Correction) and integral standby converter
Universal Mains, 85-265V
Consumption / Current draw and Thermal dissipation @ 230 V
11.2W / -A / 38.3 BTU/h (Idle) 173W / -A / 143.4 BTU/h (I/8 max. power@4Ω)
Over-Current, Over/Under Voltage, Output DC and Over-Temperature, Short Circuit Protection
1 x XLR electronically balanced, +12dB
1 x XLR electronically balanced (Link)
AD & DA Converters
Frequency Response (DSP)
20 Hz - 20 KHz; -0.5dBu at 20 Hz and 20 kHz
DSP & Processing
24bit (data) x 24 bit (coeff.),54bit accumulation registers, 96 bit precision on intermediate processing data
5 filters on input channel 7 filters per output channel
Bell, Low/High Shelving Variable Q
From -12dBu up to +6dBu by 0.5dBu resolution steps
Selectable with 1Hz resolution step from 20Hz up to 20kHz
Bell Filter Q/BW
Q from 0.5 up to 10 by 0.1 resolution steps
Low/High Shelving Filter Q/BW
Q from 0.5 up to 3 by 0.1 resolution steps
Crossover Section HPF/LPF
Butterworth 6/12/18/24/48dB per octave; Linkwitz-Riley 12/24/36/48dB per octave; Bessel 12/24dB per octave. Filter resolution 1Hz Sophisticated Dynamic Loudness function and additional High-Pass filter per input section
Input RMS Compressor
MakeUp from -12 to +12dBu; Threshold from -18dBu up to +12dBu; Knee 0~100%; Ratio from 2:1 to 100:1; Attack time from 5ms up to 500ms; Release time from 40ms up to 1000ms. Input Hold-Time up to 10sec.
Output RMS Compressor
Drive from -12 to 6dBu; Threshold from-18dB up to +12dBu; Attack time from 5ms up to 500ms; Knee 0~100%; Ratio from 2:1 to 100:1; Release time from 40ms up to 1000ms (10ms resolution)
Bypass, soft and Hard Threshold
Slipt Band X-over(only High Band)
Freq from 5kHz to 20kHz step 1Hz resolution, slope: bypass, 1st order butterworth and 2nd order Linkwitz-Riley
10 ms, 10.4us increment/decrement steps per channel
GAIN pot. -30dBu ~ 0dBu PRESET EQ 8 positions Rotary encoder switch Red LED (Power); Yellow LED (Link); Green LED (Signal presence) 1 x XLR female connector (Input) 1 x XLR male connector (Link Output) 2 x RJ45 connector (M-LAN Rs485) 2 x Locking PowerCON® 20A: AC Mains (blue) - AC Link (white)
13,99"x 2,8"x 6,11" (355x70x155mm)
Weight, Net / Shipping
3.52 lbs (1.6 Kg) / 4.96 lbs (2.5 Kg)
ASK any questions before you buy!
Or go to SpeakersAndAmps dotcom
ASK any questions before you buy!
We have distributed PRO AUDIO SPEAKERS and Amplifiers for 20 years. Go to SpeakersAndAmps dotcom to see!
We have all the other major PRO Audio Speaker Brands and Models.
We have many many more than you see here. We sell to Dealers as well.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.