Marani Pascal PDA515PF 2-Channel Power Amplifier(500W+150W@4Ω)


Price:
Sale price$599.99

Description

PDA515PF is a complete solution dedicated to 1-way or 2-way self-powered loudspeakers. Designed to meet different applications, it provides 2 channels with output power of 500W+150W@4 Ohm . Morever the 2 channels can be bridged into a powerful single channel in order to drive i.e. Subwoofers or Multiple Ways Cabinets with Passive Xovers. In addition it offers a full set of added value features such as on board DSP and RS485 connection for monitoring and control via dedicated PC software. To guarantee maximum reliability, the PDA515PF includes a highly efficient universal switch mode power supply with PFC (Power Factor Correction) which provides a total 1kW power to the 2 output channels. The 2 output stages use the Class D module
The PDA515Pf  includes a set of sophisticated processes for loudspeaker, implemented by the powerful MARANI® DSP running 96kHz/24bit [96 bits precision for the internal intermediate processes] and high performance 24bit AD/DA Converters. Processes as Noise Gate, crossover filters, parametric EQs per input and output sections,RMS compressor, alignment delay are available, all in all everything needed to optimize a self-powered loudspeaker. Morever the Clip/Limiter function per channel provides output monitoring to prevent speaker damage with gentle gain reduction at clip threshold, in addition to the efficient heat dissipation system and Over-Heat protection which themselves ensure uncompromised reliability. Furthermore the PDA515PF is also equipped with a Dynamic Loudness function and an useful Pink/White noise generator. All setup parameters for input mixing, DSP features and the limiter setting are accessible by using the remote PC software.

 

Outstanding Performance High power output: 500W + 150W @ 4Ω  
Switched-Mode Power Supply with PFC and auto voltage sensing
Class D Amp Module - full bandwith PWM modulator with ultra low distortion
Full protection circuitry including Over-Current, Over/Under-Voltage, Output DC and Over-Temperature
Excellent sonic performance with 24bit high end converters coupled with 96kHz sample rate
Top-grade DSP Engine 5 band parametric equalization per input channel
7 band parametric equalization per output channels
2 filter can be switched to Bell, Low/High Shelving, per channel
Low/High Shelving, can be selected as variable Q response
Crossover filters with slopes from 6dB/Octave up to -48dB/Octave including Butterworth, Bessel, Linkwitz-Riley
Output features a precision dynamic range controller composed of a RMS Compressor with selectable ratio and variable knee
Input features a precision dynamic range controller composed of a RMS Compressor with selectable ratio, variable knee and Hold Time.
Adjustable Delay time up to 20 ms for input and output channels
Input channel includes a Noise Gate function, Pink/White noise generator, sophisticated Dynamic Loudness function and a High-Pass filter with slopes from 6dB/Octave up to -48dB/Octave including Butterworth, Bessel, Linkwitz-Riley, and FIR Phase correction up to 640 taps
Direct PC/Network Connection Rs485 connection for system setup, monitoring and control via fully manageable remote PC software
Control Simultaneous control up to 32 units via PC software
8 Preset Selection by using rotary encoder switch
Security Lockout

 

Power & Amplifier section

Number of Channels 2
Max Output Power @ 4 ohms 500W  + 150W
Output Circuitry Class D - full bandwith PWM modulator with ultra low distortion
Output Voltage +/-70 V (SE Mode unloaded) / Bridged +/-140V(BTL Mode unloaded) 
THD @ Rated power 4 (1kHz) <0.005% (20 Hz - 20 kHz, 8Ω load, 3dB below rated power)
Signal To Noise Ratio >120 dB (A-weighted, 20 Hz - 20 kHz, 8Ω load)
Frequency Response 20 Hz - 20 kHz ± 0,15 dB (8Ω load, 1 dB below rated power)
Damping Factor >1000 (8Ω load, 1kHz and below)
Power Supplies Switch mode power supply with PFC (Power Factor Correction) and integral standby converter
Operating Range Universal Mains, 85-265V
Consumption / Current draw and Thermal dissipation @ 230 V 10.2W / -A / 38.3 BTU/h (Idle)
153W / -A / 143.4 BTU/h (I/8 max. power@4Ω)
Protections Over-Current, Over/Under Voltage, Output DC and Over-Temperature, Short Circuit Protection
Analog Input 1 x XLR electronically balanced, +12dB
Analog Output 1 x XLR electronically balanced (Link)
AD & DA Converters 24bit
Frequency Response (DSP) 20 Hz - 20 KHz; -0.5dBu at 20 Hz and 20 kHz

DSP & Processing

DSP Engine MARANI® DSP
DSP Resolution 24bit (data) x 24 bit (coeff.),54bit accumulation registers,  96 bit precision on intermediate processing data
Parametric Equalization 5 filters on input channel 
7 filters per output channel 
Filter Type Bell, Low/High Shelving Variable Q
Filter Gain Input: from -12dBu up to +12dBu by 0.5dBu resolution steps
Output: from -18dBu up to +18dBu by 0.5dBu resolution steps
Center Frequency Selectable with 1Hz resolution step from 20Hz up to 20kHz
Bell Filter Q/BW Q from 0.5 up to 10 by 0.1 resolution steps
Low/High Shelving Filter Q/BW Q from 0.5 up to 3 by 0.1 resolution steps
Crossover Section HPF/LPF Butterworth 6/12/18/24/48dB per octave; Linkwitz-Riley 12/24/36/48dB per octave; Bessel 12/24dB per octave. Filter resolution 1Hz
Sophisticated Dynamic Loudness function and additional High-Pass filter per input section
Input RMS Compressor MakeUp from -12 to +12dBu; Threshold from -18dBu up to +12dBu;
Knee 0~100%; Ratio from 2:1 to 100:1;
Attack time from 5ms up to 500ms; Release time from 40ms up to 1000ms.
Input Hold-Time up to 10sec. 
Output RMS Compressor Threshold from-18dB up to +12dBu; Attack time from 5ms up to 100ms
Release time from 40ms up to 1000ms (10ms resolution)
DLF Input: On/Off;
Output: On/Off;
Attenuation: -6dB ~ 0dB, 0.1 step
Internal Noise Generator White/Pink Noise:-40dB~0dB
Delay 20 ms, 10.4us increment/decrement steps per channel

General

User Preset 8
Front Panel GAIN pot. -30dBu ~ 0dBu
PRESET EQ 8 positions Rotary encoder switch
Red LED (Power); Yellow LED (Link); Green LED (Signal presence)
1 x XLR female connector (Input)
1 x XLR male connector (Link Output)
2 x RJ45 connector (M-LAN Rs485)
2 x Locking PowerCON® 20A: AC Mains (blue) - AC Link (white) 
IEC C13 16A Connector;
Power On/Off swithc
Dimensions 340x80x150 mm
Weight, Net / Shipping 5.84lbs(2.65Kg) / 7.72lbs (3.5Kg)

Payment & Security

PayPal Venmo

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed