Pascal Marani PDASP2SA2 2.1 Channel Power Amplifier Module AUTHORIZED DEALER!!


Price:
Sale price$899.00

Description

Pascal Marani PDASP2SA2 

Outstanding Performance
High power output: 1000W+500W+500W 4Ω
Switched-Mode Power Supply with auto voltage sensing
Pascal Class D Amp Module - full bandwith PWM modulator with ultra low distortion
Full  protection  circuitry  including  Over-Current, Over/Under-Voltage,  Output  DC  and  Over-Temperature
Excellent sonic performance with 24bit high end converters coupled with 96kHz sample rate

 
Top-grade DSP Engine
5 band equalization on input channel selected as Hi-Shelving, Bell and Lo-Shelving Variable Q
3 band parametric equalization on Output SUB, selected as Bell
7 band parametric equalization on Output A/B, selected as Bell, Low/High Shelving variable Q
Crossover filters with slopes from 6dB/Octave up to 24dB/Octave including  Butterworth, Bessel, Linkwitz-Riley Output channel features a precision dynamic range controller
Adjustable Delay time up to 40 ms for input and 20 ms for  output.
Input channel includes a Noise Gate function
Output stages feature dynamic range control composed of RMS Compressor with variable Knee and Ratio

Direct PC/Network Connection
USB connection for system setup, monitoring and control via fully manageable remote PC software

 
Control
16 Preset Selection by using rotary encoder switch
Security Lockout

Power & Amplifier section

Number of Channels 2.1
Max Output Power at 4 ohms 1000W+500W+500W at 4Ω
Output Circuitry Pascal Class D - full bandwith PWM modulator with ultra low distortion
Output Voltage 70 Vp / 140 Vpp (unload) / Bridged 140 Vp / 280 Vpp (unloaded)
THD at Rated power 4 (1kHz) <0.005%
THD at Rated power 8 (1kHz) <0.01%
Signal To Noise Ratio >120 dB (A-weighted, 20 Hz - 20 kHz, 8Ω load)
Frequency Response 20 Hz - 20 kHz ± 0,15 dB (8Ω load, 1 dB below rated power)
Damping Factor >1000 (8Ω load, 1kHz and below)
Power Supplies Universal & regulated switch mode power supply
Operating Range Universal Mains, 85-265V
Consumption / Current draw and Thermal dissipation at 230 V 23W / -A / 78.4 BTU/h (Idle)
Protections Over-Current, Over/Under Voltage, Output DC and Over-Temperature, Short Circuit Protection
Analog Input 1 x XLR electronically balanced, +12dB
Analog Output 1 x XLR electronically balanced (Link)
AD & DA Converters Cs42528 24bit
Frequency Response (DSP) 20 Hz - 20 KHz; -0.5dBu at 20 Hz and 20 kHz

 

DSP & Processing

DSP Engine MARANI M704
DSP Resolution 24bit (data) x 24 bit (coeff.),54bit accumulation registers,  96 bit precision on intermediate processing data
Parametric Equalization 5 filters on input channel, selected as  Bell, Low/High-Shelving variable Q
3 filters on output SUB channel, selected as Bell
7 filters on output A/B channel, selected as Bell, Low/High-Shelving variable Q
Filter Type Bell, Low/High Shelving Variable Q
Filter Gain Input from -12dBu up to +12dBu by 0.5dBu resolution steps
Output from -18dBu up to +18dBu by 0.5dBu resolution steps
Center Frequency Selectable with 1Hz resolution step from 20Hz up to 20kHz
Bell Filter Q/BW Q from 0.5 up to 10 by 0.1 resolution steps
Low/High Shelving Filter Q/BW Q from 0.5 up to 3 by 0.1 resolution steps
Crossover Section HPF/LPF Butterworth 6/12/18/24dB per octave
 Bessel and Linkwitz-Riley 12/24dB per octave
 Filter resolution 1Hz steps
Output RMS Compressor Threshold from -18dBu up to +12dBu
Knee: 0~100%; Ratio: 2:1~100:1
Release time from 40ms up to 1000ms; Attack time from 5ms up to 100ms tput A/B channel, selected as Bell, Low/High-Shelving variable Q
Output Routing In1, In 2, In 1+2
Delay up to 40ms for ea ch input, and up to 20ms for each output, with step of 10.4us

General

User Preset 16
Front Panel Green LED (Power); Yellow LED (Limit); Blue LED (Signal presence)
2 x XLR female connector (Input)
2 x XLR male connector (Link Output)
1 x XLR (MIC Input)
1 x USB Connection
2 x Neutrik® Speakon NL4 (Speaker)
1 x 2*8 LCD
2 x RCA connector(Line Input)
1 x Ground-lift toggle Switch
Line Gain Controller
MIC Gain Controller
1 x Locking PowerCON® 20A: AC Link (blue) 
1 x IEC C13 16A connector; On/Off Power Switch
Dimensions 13.78" x 3.15" x 7.88" (350 x 80 x 200 mm)
Weight, Net / Shipping 6.09 lbs (2.76 Kg) / 8.83 lbs (4 Kg)

ASK any questions before you buy! We have distributed PRO AUDIO SPEAKERS and Amplifiers for 20 years.  Go to SpeakersAndAmps dot com to see!We have all the other major PRO Audio Speaker Brands and Models.We have many many more than you see here.  We sell to Dealers as well.

Payment & Security

PayPal Venmo

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed