| DSP Engine |
2 x MARANI® DSP |
| DSP Resolution |
24 bit (data) x 96 bit (coeff.), 54bit accumulation registers, 96 bit precision on intermediate processing data |
| FIR for Phase Correction |
Asymmetrical 1024 Taps, with coefficients generated by Pc Sw embedded Wizard tool, allowing also FIR latency Adjustment/reduction.
Coefficients can also be imported by external third party applications, so as can be exported to third parties applications |
| Parametric Equalization |
13 PEQ filters per input
7 filters per output |
| Filter Type |
Bell, Shelving, HP/LP, Band Pass, Notch Filter and All Pass |
| Filter Gain |
From -15dBu up to +15dBu by 0.5dBu resolution steps |
| Input&Output Gain |
From -18dBu up to +12dBu by 0.5dBu resolution steps |
| Center Frequency |
from 20Hz up to 20kHz with 1Hz resolution steps |
| Filter Q/BW |
Bell Type: Q from 0.4 up to 128 in 100 steps
Shelv/Hp/LP Type: Q from 0.1 up to 5.1 in 100 steps
BandPass/Notch Type: Q from 4 up to 104 in 100 steps |
|
IIR Crossover section HP/LP |
Butterworth 6/12/18/24dB per octave
Bessel 12/24dB per octave
Linkwitz-Riley 12/24/36/48 dB per octave |
| FIR X-Over Section Hp/Lp/Bp |
Hp/Lp/Bp filters, Taps from 256 up to 512, Attenuation up to -120dB, Window type as Rect / Sinc / Keiser / Hanning / Hamming / Blackman / Nuttal / Sine |
| Internal Noise Generator |
White/Pink Noise; Level from -40dBu to 0dBu |
| Input Noise Gate |
Threshold from -80dBu up to -50dBu
Attack time from 1ms up to 1000ms; Release time from 10ms up to 1000ms |
| Input&Output RMS Compressor |
Threshold from 20dBu up to -10dBu
Ratio: 2:1~32:1; Knee: 0~100%;
Makeup from -12dBu to +12dBu
Attack time from 0.1ms up to 5000ms; Release time from 0.001sec up to 10sec |
| Output Peak Limiter |
Threshold from 20dBu to -10dBu
Attack time from 0.1ms up to 900ms; Release time from 0.04sec up to 6sec |
| Routing |
Full matrix mixing mode |
| Delay |
480 ms 10.4us increment/decrement steps per input, 340ms 20.8us increment/decrement steps per output |
| Ground Noise |
-90 dBu |
